High capacity mowing and collecting
Krone introduces the EasyCut B 1250 CV Fold Collect mower combination, specifically developed for use in challenging conditions. The three-point supported machine with a variable working width of up to 12,5 m is based on the EasyCut B 1250 Fold. The mower combination is also equipped with a conditioner and cross conveyor belts to merge […]
Krone introduces the EasyCut B 1250 CV Fold Collect mower combination, specifically developed for use in challenging conditions. The three-point supported machine with a variable working width of up to 12,5 m is based on the EasyCut B 1250 Fold.
The mower combination is also equipped with a conditioner and cross conveyor belts to merge the swath. Thus it is predestined for large surfaces in accordance with the 12 m controlled traffic farming (CTF) concept.
The CV high-performance conditioner with hardened, V-shaped steel tines (Ø 64 cm) can be operated at two speed levels via a manual gearbox. The continuously adjustable conditioner plate enables it to be adapted accurately to different harvest conditions.
Individually controlled cross conveyor belts, for which the speed can be adjusted continuously, are designed to merge the swath. The cross conveyor belts are 910 mm wide and designed for large quantities of crops. They are fitted with lateral swath flap extensions enabling the flexible and fast switchover between wide spreading and swathing. This technology enables the user to mow across a width of 24 m and deposit crops across approx. 15 m – tailor-made for the Swadro TC 1570 to swath the cut crops extremely efficiently. The capacity of the following harvesting machines is thus utilised perfectly.
Variable working width
The working width can be adjusted between 11.4 m and 12.5 m using the telescopic outrigger arms and sliding gearbox. Both of the mower units can easily be extended telescopically by up to 60 cm with a hydraulic side shift conveniently operated from the cabin – providing an optimum overcut tailored to the combined front mounted mower.
It can be combined with the EasyCut F 400 CV Fold that can produce three practically identical cut swaths. Accurate guidance in the generated tracks guarantees efficient work processes, during which soil compaction is reduced to a minimum.
The lubricated and low-maintenance EasyCut cutterbar with eight cutting discs and two mower drums provides a safe, even and clean cut. The mowers and conditioner are driven from the side. This ensures a uniform crop flow while also reducing the amount of drive power required.
The folding mechanism uses a hydraulic slewing gear to fold the outside cutting discs of the mower units to the rear and also enables a quick changeover from the working to the transport position thanks to the constant friction-fit drive train. With a transport height of less than 4 m and a transport width of under 3 m, the machine can be transported safely on the road.
Operator comfort while working
The EasyCut B 1250 CV Fold Collect is equipped with a hydraulic cutterbar relief, that can easily be adjusted from the cab to ensure optimum ground adjustment. The machine is ISOBUS-compatible and equipped with comfort on-board electronics 2.0. Corresponding retrofit solutions and terminals are available for tractors that are not ISOBUS-compatible. An optional transport chassis is also available. Its transport wheel can be used to ensure permissible axle loads are observed. If required, the mower can also be equipped with high-cut skids for different cutting heights.
