Lemken carriage for large furrow press
Lemken introduces a new trailer for its VarioPack furrow press. This allows even large furrow presses used with six-furrow or larger mounted and semi-mounted ploughs, to be easily transported by road. When ploughing, furrow presses are mainly used if there is not enough time for the soil to settle gradually and tilth to form naturally. […]
Lemken introduces a new trailer for its VarioPack furrow press. This allows even large furrow presses used with six-furrow or larger mounted and semi-mounted ploughs, to be easily transported by road.
When ploughing, furrow presses are mainly used if there is not enough time for the soil to settle gradually and tilth to form naturally. Furrow presses immediately restore capillary action and therefore retain moisture in the soil.
The new Lemken VarioPack with trailer for large furrow presses, is coupled to the tractor via a cross shaft. Its transport width of 2.8 metres enables easy passing, even through narrow field tracks. As the trailer is EU-approved for speeds of up to 40 km/h, VarioPack presses can now quickly and easily be transported to the field.
The implement is switched hydraulically from its transport to its working position from the cab. The arms of the VarioPack can be adjusted vertically, laterally and in length, allowing them to be optimally adapted to any given conditions. This ensures reliable capture even on slopes, and the furrow press can be run close to the plough to minimise side draft.
The trailer is available for large VarioPack double furrow presses with 70 or 90 cm rings.
