Small tractors handle Pöttinger HIT HT

Share this item

The new trailed HIT HT tedders from Pöttinger, with working widths between 8.60 and 17.00 meters (according to DIN), deliver maximum output, convenience and efficiency. Even with small tractors in large fields.

The power requirement is low, and thanks to the trailed design, no load is exerted on the tractor hitch. The HIT HT 8680, 11100, 13120, and 17160 models guarantee spreading quality for all types of forage thanks to the small rotor diameter of 1.42 meters and the six curved tine arms.

On HIT HT trailed tedders, the rotor chassis guides the tines, while the rotor is supported by the main frame. This means that the inner rotors do not have to bear any additional weight during operation. The weight is distributed evenly over all the rotor wheels and the working height is consistent across the entire working width.

Operator convenience

Because the rotors run at the correct distance to the ground, the sward is protected and the forage remains clean. An easily accessible hand crank provides quick, central height adjustment. A new feature on the HIT HT is that the height can also be adjusted hydraulically from the tractor seat as an option. A clearly visible scale shows the set working height. That is what we mean by maximum operating convenience.

On the models with hydraulic rotor height adjustment, the basic control electric pre-select system is now standard equipment. With this tool, pre-select folding into the transport position is possible, height adjustment and fence line tedding. Only one double-acting spool valve is needed to operate the machine.

Right up to the boundary

For fence line tedding, the two rotors on the outer right-hand side can be folded backwards hydraulically at an angle of 15°. The two diagonal rotors distribute the forage over the mown area without forming a swath. A strip is left free adjacent to neighbouring fields. The rotors can be adjusted conveniently from the tractor seat using a double-acting hydraulic cylinder.

The HIT HT high output tedders have proven, Liftmatic Plus lifting technology. A single-acting spool valve moves the rotors by motion link into the horizontal position and then raises them. This prevents the tines from scraping the ground. Liftmatic Plus also reduces the weight acting on the tines, further increasing durability and output.

The Dynatech rotor unit on the new HIT HT ensures clean forage with minimum crude ash ingress, cleanly collected crop, an optimum spread pattern and a clean machine.

Leave a Reply

Your email address will not be published. Required fields are marked *

Stay Connected

More Updates

Receive the latest news

Subscribe to our newsletter