10 years Premos pelleting press
Nearly ten years ago, Krone presented the Premos 5000 mobile pelleting press at Agritechnica 2015. High-fiber pellets produced with this machine can be used in a variety of ways, including forage and litter for animals, as well as fuel. When used in the field, crops are taken from the swath by the pick-up and conveyed […]
Nearly ten years ago, Krone presented the Premos 5000 mobile pelleting press at Agritechnica 2015. High-fiber pellets produced with this machine can be used in a variety of ways, including forage and litter for animals, as well as fuel.
When used in the field, crops are taken from the swath by the pick-up and conveyed to two compression rollers. Then they are pressed inside the rollers through perforated dies measuring 16 mm. The special feature is that unlike other processes, the Premos 5000 has no performance-sapping pretreatment with chopping or grinding. This means that only half as much energy is expended. The temperatures and high pressures reached during pelletizing reduce the bacterial load and macerate the material.
Over the following years the pelleting press was continuously modified. At “Grüne Woche 2018”, Krone presented a machine with larger compression rollers and a new main gearbox. This boosted throughput from 3 to 5 t/h. The tandem axle, now installed as a standard feature, ensures even better driving comfort. At Agritechnica 2019, Krone presented a bale shredding system with an automatic twine remover that simplifies handling in stationary operation. The bale shredding system can be conveniently controlled from the tractor cab via an operating terminal. The software and hardware, which had already been updated two years previously, were again modernized to make it even more convenient to operate the machine.
Highly absorbent, clean and safe
What was originally intended as a versatile solution for energy and agricultural uses such as fuel, litter, forage material and manipulable material, became widespread mainly in livestock farming. Due to their high absorbency, hygienic properties and easy handling, high-fibre pellets today are a popular alternative to chopped straw.
Thanks to their high absorptive capacity (1 kg of high-fiber pellets binds up to 4 liters of water) the high-fibre pellets quickly bind moisture from animal excretions and improve the stable climate due to minimal outgassing of ammonia. Significantly less material is required in comparison to chopped straw, which means less accumulation of manure and less time spent mucking.
Litter made with high-fiber pellets is easy to handle and low in dust compared to chopped straw, which makes them a good choice especially for horse owners. Due to heating during the pelletizing process, the high-fiber pellets are nearly germ-free, so they are safe to use as manipulable material in poultry and pig farming. Dairy farmers are also increasingly using high-fiber pellets as litter material for lying stalls, where they form a dry mattress. This provides a clean and comfortable place for cows to lie, which promotes cow comfort and udder hygiene.
More gas, less maize
Use of high-fiber pellets for energy as a co-substrate in biogas plants is also currently a matter of interest. Unlike conventional straw, high-fiber pellets do not form any floating layers in the fermenter and have no problem mixing with the fermentation substrate. Due to the decomposition during pelletizing, the energy contained in the straw is also available for the methane-forming bacteria considerably faster and the wide C/N ratio improves process stability in the fermenter. This makes it possible to increase the gas yield by up to 40% in high-fiber pellets compared to untreated straw. 1 t of high-fiber pellets can replace a good 2 t of maize silage, thereby significantly alleviating the competition over biomass for both feed and energy.
At Agritechnica 2015 and 2019, Krone received Gold and Silver medals respectively for the Premos pelletizer.
